Mark Fit Decal Solution
$3.90
In stock
40ml Bottle
Mark Fit enables perfect decal applications. It softens decals so they can easily fit to uneven, rounded, and matt finish surfaces of plastic models while increasing adhesion. The bottle’s cap comes with a convenient brush.
How to use.
Apply Mark Fit to the model where decal is applied.
Place decal on the model.
Position decal with a wet finger.
Press decal down gently with a soft cloth or cotton swab until excess water is gone.
Apply Mark Fit over the decal, then press down gently with a soft cloth or cotton swab.
Allow the decal to completely dry.
Ground Shipping Only
| Weight | 4 oz |
|---|---|
| Dimensions | 1.625 × 1.625 × 2.5 in |
Related products
-
Add to cart
40ml Bottle Mark Fit is a special solvent designed to soften your model decals, and allows you to apply them onto difficult to apply areas such as bumpy and curved surfaces. This “strong” version has a more powerful formula for softening decals compared to the standard version. The Strong version helps decals adhere and conform …
-
Add to cart
Mr. Mark Setter is an adhesive component, which gives decals greater adhesion to plastic parts. After any air bubbles are removed by pressing on the decal with a cotton swab, a coating of Mr.Mark Setter is applied and allowed to dry. Because the decal now has a greater degree of adhesion, adhesive silvering (the floating …
-
Add to cart
Mr.Mark Softer is a softening agent designed to be used with decals (slidemarks). It enables decals to connform to rough and curved surfaces./n/nHow To Use Mr.Mark Softer/n1. Apply a small drop of Mr.Mark Softer to the area where the decal will go using the brush attached to the bottle cap./n2. Apply the decal over this …
