Mr. Mark Softener
$4.49
In stock
Mr.Mark Softer is a softening agent designed to be used with decals (slidemarks). It enables decals to connform to rough and curved surfaces./n/nHow To Use Mr.Mark Softer/n1. Apply a small drop of Mr.Mark Softer to the area where the decal will go using the brush attached to the bottle cap./n2. Apply the decal over this area./n3. Apply gentle pressure to the decal with a soft cloth, removing any excessive liquid and ensuring that the decal is down, fully adhered to the surface./n/nThe decal will stick perfectly, even on uneven or curved surfaces. If air bubbles do get in between the decal and the model surface, allow the decal to dry, then carefully prick the decal with a needle and insert Mr.Mark Softer through the resulting hole. The air will escape, and the decal will then stick down conforming to the surface of the plastic part./n/nGround Shipping Only
| Weight | 4 oz |
|---|---|
| Dimensions | 1.875 × 1.875 × 3.25 in |
Related products
-
Add to cart
40ml Bottle Mark Fit is a special solvent designed to soften your model decals, and allows you to apply them onto difficult to apply areas such as bumpy and curved surfaces. This “strong” version has a more powerful formula for softening decals compared to the standard version. The Strong version helps decals adhere and conform …
-
Add to cart
Mr. Mark Setter is an adhesive component, which gives decals greater adhesion to plastic parts. After any air bubbles are removed by pressing on the decal with a cotton swab, a coating of Mr.Mark Setter is applied and allowed to dry. Because the decal now has a greater degree of adhesion, adhesive silvering (the floating …
